Lasers & Optoelectronics · Core deck

Lasers & Optoelectronic Devices Concept Deck

This sheet compresses your laser & optoelectronics VIVA questions: laser basics and rate equations, resonators, semiconductor junctions, LEDs & laser diodes, photodetectors, modulation and noise, plus key real-world applications.

Lasers, Semiconductors & Optoelectronics

The goal here is: if someone asks you “Explain this device”, you can sketch its structure, write 1–2 key equations and list 3–4 main points from memory. Each card below is tuned for that kind of quick verbal answer.

Laser Basics & Rate Equations

Stimulated emission, population inversion, gain and simple rate equation picture of laser operation.

Principle

Conditions for Laser Action

LASER = Light Amplification by Stimulated Emission of Radiation.

  • Stimulated emission coefficient > absorption in active region → net gain.
  • Population inversion: N₂ > N₁ between upper and lower laser levels.
  • Optical feedback: resonator provides multiple passes through gain medium.

Einstein picture

Absorption, Spontaneous & Stimulated Emission

Three fundamental radiative processes described by Einstein coefficients.

  • Absorption: lower → upper level by photon absorption.
  • Spontaneous emission: random-phase photon, isotropic directions.
  • Stimulated emission: incident photon triggers identical photon (same ν, k, pol.).

Rate model

Simple Laser Rate Equations (Conceptual)

Rate equations track evolution of population inversion and photon number.

  • dN/dt = pump − decay − stimulated emission term.
  • dS/dt = gain · S − losses + spontaneous emission term (β).
  • Steady state above threshold → constant N ≈ Nthr, output power ∝ (pump − threshold).

Laser Resonators & Beam Properties

Optical cavities, longitudinal/transverse modes, Gaussian beams and quality factor.

Cavity

Optical Resonator Basics

Mirrors form a cavity that selects certain standing-wave field patterns (modes).

  • Resonance condition: round-trip phase shift = 2πm.
  • Longitudinal modes: discrete frequencies separated by Δν = c / (2nL).
  • Transverse modes: TEMmn patterns determined by mirror geometry.

Stability

Resonator Stability Condition

Only certain mirror curvatures and separations form stable cavities.

  • Parameters: g₁ = 1 − L/R₁, g₂ = 1 − L/R₂.
  • Stability: 0 < g₁g₂ < 1.
  • Stable cavity supports bounded Gaussian-like modes.

Beam quality

Gaussian Beam & M² Factor

Ideal fundamental laser mode is Gaussian; real beams deviate from this.

  • Waist w₀, Rayleigh range zR, divergence θ ~ λ/(πw₀).
  • M² >= 1 quantifies beam quality (1 for ideal Gaussian).
  • Lower M² → better focusability and higher irradiance at focus.

Semiconductor Basics & Junctions

Energy bands, carriers, p–n junctions and radiative recombination fundamentals.

Bands

Band Structure & Bandgap

In semiconductors, allowed energy levels form bands separated by a bandgap Eg.

  • Valence band: mostly filled electrons; conduction band: mobile electrons.
  • Direct bandgap: k-conserving transitions → efficient light emission (e.g., GaAs).
  • Indirect bandgap: needs phonon; weak radiative recombination (e.g., Si).

p–n junction

p–n Junction Under Bias

Basic building block for LEDs, laser diodes and photodiodes.

  • At equilibrium: depletion region, built-in potential.
  • Forward bias: barrier reduced → injection of carriers across junction.
  • Recombination in active region can be radiative (light) or non-radiative.

Recombination

Radiative vs Non-Radiative Recombination

When an electron recombines with a hole, energy can appear as photon or heat.

  • Radiative: band-to-band (LED/LD emission). Photon energy ≈ Eg.
  • Non-radiative: via defects (Shockley–Read–Hall) or Auger processes.
  • Quantum efficiency depends on ratio of these rates.

LEDs & Laser Diodes

Structures, emission characteristics and main comparison points between LEDs and semiconductor lasers.

LED

Light Emitting Diodes (LEDs)

Spontaneous emission from a forward-biased p–n junction in a direct bandgap semiconductor.

  • Broad spectral width (tens of nm), Lambertian emission pattern.
  • Lower brightness & lower coupling efficiency into fibers.
  • Advantages: low cost, simple drive, excellent reliability.

LD

Laser Diodes (LDs)

Add an optical cavity to the LED structure → stimulated emission dominates above threshold.

  • Active region in double heterostructure or quantum well.
  • Facet reflections form Fabry–Pérot cavity; or gratings for DFB/DBR lasers.
  • Narrow linewidth, high brightness, efficient coupling to fibers/waveguides.

Threshold

Laser Diode L–I Curve & Threshold

Output vs current shows a kink at threshold current Ith.

  • Below Ith: mainly spontaneous emission (LED-like region).
  • Above Ith: stimulated emission dominates, linear slope efficiency.
  • Temperature strongly affects Ith and efficiency.

Photodetectors & Receiver Front-End

PIN and APD structures, responsivity and basic receiver considerations (overlaps with guided-wave optics but from device perspective).

PIN

PIN Photodiode

p–i–n structure provides depletion region where photons are absorbed and electron–hole pairs are generated.

  • Reverse bias extends depletion width and speeds collection.
  • Responsivity R ≈ η q / (hν) [A/W].
  • Fast response, low dark current → widely used in receivers.

APD

Avalanche Photodiode (APD)

APD provides internal gain via impact ionization in a high-field region.

  • Multiplication factor M > 1 amplifies photocurrent.
  • Improves sensitivity but adds excess noise and requires high bias.
  • Used when very low received power and high speed are needed.

Front-end

Transimpedance Amplifier (TIA) Front-End

Converts detector current to voltage while controlling noise bandwidth.

  • Feedback resistor sets gain; capacitances set bandwidth.
  • Trade-off between gain and speed.
  • Total input-referred noise dictates minimum detectable signal.

Modulation, Linewidth & Noise

How lasers are modulated, what sets linewidth and what main noise processes appear.

IM

Intensity Modulation of Laser Diodes

Varying injection current varies output optical power.

  • Small-signal modulation: relaxation oscillation frequency sets speed limit.
  • Large-signal: pattern effects and chirp may degrade transmission in fibers.
  • Direct IM simplest but not always best for high-speed links.

Linewidth

Laser Linewidth & Schawlow–Townes

Even “monochromatic” lasers have finite linewidth due to phase noise.

  • Fundamental limit: Schawlow–Townes formula (inversely ∝ output power, Q²).
  • Semiconductor lasers also have linewidth enhancement factor (α-factor).
  • Narrow linewidth crucial for coherent communication and sensing.

Noise

Key Noise Mechanisms in Laser Output

Fluctuations in amplitude and phase originate from various processes.

  • Relative intensity noise (RIN) from spontaneous emission fluctuations.
  • Phase noise → linewidth; important for coherent detection.
  • Technical noise: drive current fluctuations, thermal drift, mechanical vibrations.

Applications & Advanced Concepts

A quick view of where these devices are used and a few advanced structures you might be asked about at a conceptual level.

Comms

Lasers & Detectors in Fiber Links

Core building blocks for long-distance, high-capacity communication.

  • DFB / DBR lasers at 1310/1550 nm for WDM systems.
  • PIN/APD receivers with TIAs for high bit rates.
  • Design must balance power, dispersion and nonlinearities (see GWO sheet).

Sensing

Optoelectronic Devices in Sensing

Many sensors use lasers + detectors as transducers.

  • LIDAR: pulsed lasers + timing electronics → distance / 3D imaging.
  • Interferometric sensors: phase shifts encode displacement, pressure, etc.
  • Photodiode arrays & cameras used for imaging-based metrology.

Advanced

Advanced Semiconductor Laser Structures (Conceptual)

Device design can strongly tailor spectrum, direction and efficiency.

  • DFB/DBR lasers: built-in gratings for single-frequency emission.
  • VCSELs: vertical-cavity surface-emitting lasers, circular beams, easy 2D arrays.
  • Quantum well / quantum dot lasers: improved performance, lower threshold, tailored gain.